Allied Telesis AT-S70 User Manual
Page 78
Chapter 7: Working with Line Cards and Other Modules
78
Link
Displays the status of the link state on the ports.
Online - Indicates that there is a valid link.
Offline - Indicates that there is no link.
Speed
Displays the operating speed of the ports.
Possible values are:
Fiber port (Port A) - 10M or 100M
Copper port (Port B) - Auto, 10M, or 100M
Mode
Displays the duplex mode of the ports. Possible values are:
Auto - The port is auto-negotiating with the connected device to
automatically configure to the highest common setting.
Full - The module can send and receive data simultaneously.
Half - The module can send or receive data, but not both at the
same time.
RX/ACT
Displays the status of the RX/ACT state on this port. Possible values
are:
On - The status report of the RX/ACT state on the port is turned
ON.
Off - The status report of the RX/ACT state on the port is not
active.
Configure Operating Mode
Configures the operating mode of a line card. For more information, go
to “Configuring Line Card Operating Mode” on page 81.
Module Name
Displays the name that given to the line card selected. Left blank if it
has not been given a name.
4. Press
menu, to save the settings and return to the previous menu.