Allied Telesis AT-S70 - Manual (Page 111)

AT-S70 Management Software User’s Guide
111
Sending OAM Variable Request
To send OAM variable request, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, shown in Figure 41 on
page 94, is displayed.
2. Select a line card on which you want to configure.
3. Press .
The Module Configuration Menu, shown in Figure 42 on page 95, is
displayed.
4. Select the port that you want to configure the OAM operations on.
5. Press .
The Port Management Menu, shown in Figure 43 on page 95, is
displayed.
6. From the Port Management Menu, select OAM Configurations.
The OAM Configuration Menu, shown in Figure 44 on page 96, is
displayed.
7. From the OAM Configuration Menu, select the Send OAM Variable
Request Menu.
The window shown below is displayed.
8. Enter the specific package or object being returned. The default is 1.
The window shown below is displayed.
9. Enter a number of the specific package or object being returned. The
default is 1.
10. Press or hit any key to continue.
Converteon
Enter branch number [0 - 255] -
Converteon
Enter leaf number [0 - 255] ->