Allied Telesis AT-S70 - Manual (Page 95)

AT-S70 Management Software User’s Guide
95
Figure 42. Module Configuration Menu (Line Card)
4. Select the port that you want to configure the OAM operations on.
5. Press .
The Port Management Menu, shown in Figure 43, is displayed.
Figure 43. Port Management Menu
6. From the Port Management Menu, select OAM Configurations.
Module Configuration Menu
Converteon
Module 4
Module: AT-CM202
Port Link Speed Mode RX/ACT
A(100BaseFX) Online 100M Full Off
B(100BaseTX) ONline 10M Half Off
Configure Operating Mode
Module name
Return to Module Status and Configuration Menu...
Port Management Menu
Module 4 - Port A
Port Configurations
OAM Configurations
Return to Module Configuration Menu...