Allied Telesis AT-S70 - Manual (Page 77)

AT-S70 Management Software User’s Guide
77
Displaying Line Card Status Information
The AT-S70 management software provides detailed information about
the line cards including items such as link, port speed, duplex mode, and
activity.
To display detailed line card status information, perform the following
procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, shown in Figure 31 on
page 75, is displayed.
2. Select the line card whose information you want to display.
3. Press .
An example of the Module Configuration Menu for the AT-MC202 line
card, shown in Figure 32, is displayed.
Figure 32. Module Configuration Menu (Line Card)
The Module Configuration Menu items and options are described
below:
Module
Displays the type of line card you selected.
Port
Identifies the port of the module selected.
Module Configuration Menu
Converteon
Module 4
Module: AT-CM202
Port Link Speed Mode RX/ACT
A(100BaseFX) Online 100M Full Off
B(100BaseTX) ONline 10M Half Off
Configure Operating Mode
Module name
Return to Module Status and Configuration Menu...