Allied Telesis AT-S70 - Manual (Page 88)

Chapter 7: Working with Line Cards and Other Modules
88
Working with the Redundant AT-CV5M01 CPM Card
The AT-CV5M01 Control Processor Module (CPM) is the CPU subsystem
for the AT-CV5000 chassis. The AT-CV5M01 CPM card provides
management capability to configure and monitor the status of the
converter line cards.
Only one CPM card is needed to provide management capabilities to the
converter line cards. However, another CPM can simultaneously be
installed in the chassis as a redundant CPM card.
To switch over to the redundant CPM card, perform the following
procedure:
1. From the Main Menu, select Administration.
The Administration Menu, as shown in Figure 39, is displayed.
Figure 39. Administration Menu
2. From the Administration Menu, select CPM Switch Over.
3. Press .
Administration Menu
Converteon
Image Download Through TFTP
Image Download Through XMODEM
LineCard Image Download Through XMODEM
LineCard Image Download Through TFTP
Upload Configuration Through TFTP
Download Configuration Through TFTP
Ping a remote system
Syslog Server Address: Null (not configured)
Syslog Facility Code: 1
Event Log
Activity Monitor
> Start Log
Stop Log
Diagnostics
CPM Switch Over
Reset Chassis and Restart Line Cards
Return to Main Menu...