Allied Telesis AT-S70 - Manual (Page 116)

Chapter 9: File Downloads and Uploads
116
Note
There are two different image files used with the Converteon™
products, the image file used for the chassis is “ATS70.img” and the
image file used for the line cards is “ATS73.img”.
4. In the Protocol field, select the transfer protocol as either Xmodem or
1K Xmodem for a faster download.
5. Click Send.
The software immediately begins downloading onto the chassis. The
Xmodem File Send window, shown in Figure 53, displays the current
status of the software download. The download process takes several
minutes to complete.
Figure 53. Xmodem File Send Window
The download begins. If you are downloading a configuration file, the
chassis automatically resets once the download is complete. Some
network traffic may be lost during the system reset.
Caution
When downloading a chassis image file, the chassis must initialize it
by decompressing it and writing it to FLASH. This requires several
minutes to complete. Do not reset or power off the unit while it is
decompressing the file.