Allied Telesis AT-S70 - Manual (Page 118)

Chapter 9: File Downloads and Uploads
118
Downloading Software Image Files
The software image file is provided in a self-extracting compressed file
which also contains several other files. The software image file has an
.IMG extension. This is the one to be used in the upgrade procedures.
Note
There are two different image files used with the Converteon™
products, the image file used for the chassis is “ATS70.img” and the
image file used for the line cards is “ATS73.img”.
Caution
Downloading a new AT-S70 image file or configuration file will cause
a chassis to reset. Some network traffic may be lost.
Downloading
Software Image
File Through
TFTP
To download a new AT-S70 software image onto the chassis using TFTP,
perform the following procedure:
1. Establish a local management session on the chassis where you
intend to download the new management software.
2. From the Main Menu, select Administration.