Allied Telesis AT-S70 - Manual (Page 55)

AT-S70 Management Software User’s Guide
55
Starting and
Stopping the
Activity Log
To start or stop the activity log, perform the following procedure:
1. From the Main Menu, select Administration.
The Administration Menu, shown in Figure 18, is displayed.
Figure 18. Administration Menu
2. From the Administration Menu, select Start Log to start the activity log
or Stop Log to stop the activity log.
The default is Start Log.
Displaying the
Activity Log
To view the activity log, perform the following procedure:
1. From the Main Menu, select Administration.
The Administration Menu, shown in Figure 18 on page 55, is
displayed.
2. From the Administration Menu, select Activity Monitor.
Administration Menu
Converteon
Image Download Through TFTP
Image Download Through XMODEM
LineCard Image Download Through XMODEM
LineCard Image Download Through TFTP
Upload Configuration Through TFTP
Download Configuration Through TFTP
Ping a remote system
Syslog Server Address: Null (not configured)
Syslog Facility Code: 1
Event Log
Activity Monitor
> Start Log
Stop Log
Diagnostics
CPM Switch Over
Reset Chassis and Restart Line Cards
Return to Main Menu...