Downloading line card image file through tftp – Allied Telesis AT-S70 User Manual
Page 124
Chapter 9: File Downloads and Uploads
124
The following message, shown in Figure 64, is displayed.
Figure 64. XModem - Line Card Image Downloading Window
8. Begin the image file transfer of the new management software image.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
9. Proceed to the procedure in the “Downloading Files using Hilgraeve
Downloading
Line Card Image
File Through
TFTP
To download a new line card image file onto a chassis from a local
management session using Xmodem, perform the following procedure:
1. Start a local management session.
2. From the Main Menu, select Administration.
The Administration Menu, shown in Figure 55 on page 119, is
displayed.
3. From the Administration Menu, select Linecard Image Download
Through TFTP.
The prompt, shown in Figure 65, is displayed.
Figure 65. TFTP - Line Card Image Download Prompt
4. Enter the slot number of the line card you wish to download the image
file to.
5. Press
Ready to download linecard image.....
Converteon
Enter LineCard Slotnum: ->