Allied Telesis AT-S70 - Manual (Page 25)

AT-S70 Management Software User’s Guide
25
Quitting from a
Telnet
Management
Session
To end a Telnet management session, return to the Main Menu and type Q
for Quit.
You should always be sure to exit from a management session when you
are finished managing a Converteon™ chassis. This can prevent
unauthorized changes to a chassis’ configuration should you leave your
workstation unattended.
Note
You cannot operate both a local management session and a Telnet
management session on the same chassis simultaneously. You
cannot have any number of Telnet sessions running if there is a local
session running.Failure to properly exit from a local or Telnet
management session may block future management sessions.