Allied Telesis AT-S70 - Manual (Page 28)

Chapter 3: AT-S70 Management Security Features
28
Manager and Operator Passwords
The AT-S70 management software has two levels of management
access: Manager and Operator. The Manager account allows you to
configure all parameters of a Converteon™ chassis, while the Operator
account only allows you to view the parameter settings. The default login
name for Manager access is “manager” and the password is “friend”. The
default login name and password for Operator access are both “operator”.
Login names and passwords are case-sensitive.
Note
Once the password has been changed and is forgotten, you must
call Technical Support to have it reset back to the default password.
For Technical Support contact info, refer to “Contacting Allied
Telesyn” on page 12.
Configuring the
Management
Passwords
To prevent unauthorized access to the management program, you can
assign a password to the program. Any person who starts the interface will
be required to enter the password, regardless of how they access the
program (i.e., RS-232 port, Telnet, or SNMP management program). For
detailed information on the management program, refer to Chapter 1,
”Overview” on page 14.
To change the Manager or Operator password, perform the following
procedure:
1. From the Main Menu, select System Configuration.
The System Configuration Menu, shown in Figure 3 is displayed.
Figure 3. System Configuration Menu
System Configuration Menu
System Name: Converteon
System Date (mm/dd/yy) 00/00/00
System Time (hh:mm:ss) 00:16:32
Omega Options
IP Parameters
Terminal Configuration
Temperature Threshold Configuration
Return to Main Menu...