Allied Telesis AT-S70 - Manual (Page 57)

AT-S70 Management Software User’s Guide
57
Using the System Diagnostics
The AT-S70 management software provides an option to run diagnostic
self-tests on the chassis and line cards. The following section describes
how to run chassis diagnostics. Using this information helps you diagnose
performance problems with the chassis.
The diagnostic command displays the status of the following items:
ˆ Flash PROM
ˆ Serial interface
ˆ Power supply status
ˆ Optional power supply status (if installed)
ˆ Operational status, speed, temperature and power of the fan modules
A diagnostic test also displays the following:
ˆ Management Software Image Version and Cycle Number
ˆ Line card MAC Address
ˆ Line card Serial Number
ˆ Converteon™ chassis model
ˆ Running and current times
To run the chassis diagnostics, perform the following procedure:
1. From the Main Menu, select Administration.
The Administration Menu, shown in Figure 18 on page 55, is
displayed.
2. From the Administration Menu, select Diagnostics.