Allied Telesis AT-S70 User Manual

Page 52

Chapter 5: Monitoring System Performance

Displaying Remote Module Status and Configuration Information

The AT-S70 management software provides comprehensive status
information about the operation of the remote module and its components.

Note

ATI Proprietary Remote Management – This feature only supports
the AT-CM Series line cards (AT-CM202, AT-CM212, etc.), and not
the AT-CV Series line cards (AT-CV10x, AT-CV1KSS, etc.) For
Remote Module Status and Configuration to work, the OAM Visible
Mode (operating mode) must be turned ON. This feature utilized and
extended the IEEE 802.3 ah (OAM) protocol standard.

To view remote module status information, perform the following
procedure:

1. From the Main Menu, select Remote Module Status and

Configuration.

The Remote Module Status and Configuration Menu, shown in
Figure 16, is displayed.

Figure 16. Remote Module Status and Configuration Menu

Remote Module Status and Configuration

Converteon

Remote Peer On Fiber Connection

Module

Card Type

Version

Link Status (Port A)

1: AT-CV5M01

No Support

2: AT-CM202

3: AT-CM202

AT-CM212A/1

V.1.2.0

Online

4: AT-CM202

5:(Not Inserted)

6: AT-CM212A/1

7: AT-CM212A/1

AT-CM202

V.1.2.0

Online

8: AT-CM212B/1

9: AT-CM212B/1

10:(Not Inserted)

11: AT-CV1KSS

No Support

12: AT-CV1KSS

No Support

13: AT-CV1KSS

No Support

14: AT-CV1KSS

No Support

15:(Not Inserted)

16: AT-CV102

No Support

More ...

Return to Main Menu ...