Allied Telesis AT-S70 - Manual (Page 129)

AT-S70 Management Software User’s Guide
129
Uploading
Configuration
Files
To upload a new AT-S70 software configuration file onto a chassis from a
local management session using TFTP, perform the following procedure:
Note
Uploading a configuration file will NOT interrupt traffic.
1. Establish a local management session on the chassis where you
intend to download the new management software.
2. From the Main Menu, select Administration.
The Administration Menu, shown in Figure 55 on page 119, is
displayed.
3. From the Administration Menu, select Upload Configuration
Through TFTP.
The prompt, shown in Figure 74, is displayed.
Figure 74. TFTP - Upload Configuration File Prompt
4. Enter the IP address of the TFTP server.
5. Press .
The prompt, shown in Figure 75, is displayed.
Figure 75. TFTP - Enter Configuration File Name Prompt
6. Enter the filename of the configuration file that is to be stored as on the
TFTP server.
7. Press .
TFTP Server IP Address-> _
Configuration File Name-> _