Allied Telesis AT-S79 - Manual (Page 321)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 321
Modifying a Dial-in User
This procedure explains how to modify an existing Dial-in User on the
switch. For each user, you may change the password and the VLAN
assignment. However, you cannot change the user name.
To modify a Dial-in user, perform the following procedure:
1. From the bookmarks on the left side of the page, select Security.
2. Select Dial-in User.
The Dial-in User Page is shown in Figure 94 on page 320.
3. To change the password for a particular user, type the new password
in the Password field.
4. To change the VLAN assignment, type the new VLAN number in the
Dynamic VLAN field.
5. Click Apply to save your changes on the switch.