Allied Telesis AT-S79 - Manual (Page 311)

AT-S79 Management Software User’s Guide
Section II: Web Browser Interface 311
8. To configure all of the ports to the same settings, in the All row,
configure one, two, or all of the following settings: STP Status, Priority,
and Path Cost. Then click Apply.
Configuring the
Advanced RSTP
Port Settings
To configure the advanced RSTP port settings, perform the following
procedure:
1. From the bookmarks on the left side of the page, select Bridge.
The Spanning Tree folder is displayed.
2. From the Bridge folder, select Spanning Tree.
3. From the Spanning Tree folder, select RSTP Advanced Port
Configuration.
The RSTP Advanced Port Configuration page is shown in Figure 91.
Figure 91. RSTP Advanced Port Configuration Page