Allied Telesis AT-S79 - Manual (Page 292)

Chapter 30: Simple Network Management Protocol (SNMP)
292 Section II: Using the Web Browser Interface
Deleting an SNMP Community
Use the following procedure to delete an existing SNMP community in the
Community Table.
1. From the bookmarks on the left side of the page, select Bridge.
2. From the Bridge folder, select SNMP.
3. From the SNMP folder, select Community Table.
The Community Table page is shown in Figure 84 on page 290.
4. To delete a community, select delete in the Community Table next to
the community that you want to remove.
The Community Table page is updated.