Allied Telesis AT-S79 - Manual (Page 280)

Chapter 29: Virtual LANs
280 Section II: Using the Web Browser Interface
Assigning Ports to a VLAN
To assign ports to a tagged or port-based VLAN, perform the following
procedure:
1. From the bookmarks on the left side of the page, select Bridge.
2. From the Bridge folder, select VLAN.
3. From the VLAN folder, select VLAN Mode.
The VLAN Mode page is shown in Figure 78.
Figure 78. VLAN Mode Page
4. To add ports to a Tagged or Port-Based VLAN, select the ports and
then click Apply.