Allied Telesis AT-S79 - Manual (Page 140)

Chapter 11: Simple Network Management Protocol (SNMP)
140 Section I: Using the Menus Interface
The Trap Receiver Configuration Menu is displayed in Figure 31 on
page 133.
4. Type M to select Modify Trap Receiver Entry.
The following prompt is displayed:
Enter entry number>
a. Enter a trap number between 1 and 10. Then press Enter.
The following prompt is displayed:
Choose which to be modified (V/I/C/A) >
Note
In the above prompt, V represents Trap Version, I represents IP
address, C represents community name, and A represents all of the
previous choices.
The following prompt is displayed:
Enter entry number>
b. Enter a trap number between 1 and 10. Then press Enter.
c. Type V to change the Trap SNMP version number.
The following prompt is displayed:
Enter trap version (1/2) >
d. Type the trap version and then press Enter. Select 1 for SNMP
version 1 or select 2 for SNMP version 2vc.
The Trap Receiver Configuration Menu is updated.
e. Type I to change the IP address.
The following prompt is displayed:
Enter IP address for trap receiver>
f. Enter an IP address in the xxx.xxx.xxx.xxx format.
The Trap Receiver Configuration Menu is updated.
g. Type C to change the community name.
The following prompt is displayed:
Enter community name >