Allied Telesis AT-S79 - Manual (Page 272)

Chapter 27: Destination MAC Address Filter
272 Section II: Using the Web Browser Interface
Setting a Destination MAC Filter
This procedure explains how to set a Destination MAC Filter on the switch.
To add a MAC address from a Destination MAC Filter list, perform the
following procedure:
1. From the bookmarks on the left side of the page, select Security.
2. From the Security folder, select Destination MAC Filter.
The Destination MAC Filter Page is shown in Figure 75.
Figure 75. Destination MAC Filter Page
3. To add a device, type in a MAC address in the xx:xx:xx:xx:xx:xx
format. Then click Add.
Note
Use the Tab key to advance from one MAC address segment to the
next.