Allied Telesis AT-S79 - Manual (Page 277)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 277
3. To change the status of the packet threshold for all the ports on the
switch, select the pull-down menu next to Broad/Multicast Packet
Threshold field. Choose Low, Medium, and High. Then press Apply.
By default, the packet threshold is set to Low.
4. To set the DLF Ingress Packet Status for all the ports on the switch,
select the pull-down menu next to the DLF Ingress Packet Status field.
Choose between Enable or Disable. Then press Apply.
By default, the packet status is set to Disable.
5. To select the Ingress mode of a port, select the pull-down menu next to
the Ingress field. Choose between Enable and Disable. Then press
Apply.
By default, the Ingress field is set to Disable.
6. To select the mode of a port, select the select the pull-down menu next
to the Mode field. Choose between Bcast for broadcast mode or
Bcast/Mcast for multicast mode. Then press Apply.
By default, the Mode field is set to Bcast/Mcast.