Allied Telesis AT-S79 - Manual (Page 236)

Chapter 21: Basic Switch Parameters
236 Section II: Using the Web Browser Interface
Setting the User Interface Configuration
This procedure explains how to adjust the user interface and security
features on the switch. With this procedure you can:
ˆ Change the console timer, used to automatically end inactive local
management sessions.
ˆ Change the AT-S79 management login user name and password.
ˆ Enable and disable the web server, used to manage the switch from a
remote management station with a web browser.
To set the switch’s user interface configuration, perform the following
procedure:
1. From the System folder, select User Interface.
The User Interface page is shown in Figure 63.
Figure 63. User Interface Page
The User Interface page has three parameters:
ˆ Console UI Idle Time Out
ˆ SNMP Agent
ˆ Web Server
2. To configure the console idle time out parameter, do the following:
a. Click the Console UI Time Out field and enter a new value. The
range is 0 to 60 minutes. The default is 5 minutes. A timeout value
to 0 causes the console connection to never time out.