Allied Telesis AT-S79 - Manual (Page 233)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 233
Configuring System Administration Information
This section explains how to enable password protection and create users
in the web interface. See the following sections:
ˆ “Adding System Administration Information” on page 233
ˆ “Modifying Administration Information” on page 234
ˆ “Deleting Administration Information” on page 235
Adding System
Administration
Information
To set a switch’s administration information, perform the following
procedure:
1. Click on the System folder.
2. From the System folder, select Administration.
The Administration Page is shown in Figure 61.
Figure 61. Administration Page
3. To enable or disable password protection, select Enable or Disable
from the pull-down menu next to the Password Protection field.
You can control login authentication by enabling password protection
which requires a user to supply a password when logging onto the
switch. If you disable password protection, a user can login without
inputting a password. By default, this field is set to Enable.
4. To create an entry number, type 1 through 8 in the box next to the
Entry number field.
This value appears as the Index value in the Administration table.