Allied Telesis AT-S79 - Manual (Page 259)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 259
Disabling Port Mirroring
To disable port mirroring, perform the following procedure:
1. From the Bridge folder, select Spanning Tree.
2. From the Spanning Tree folder, select Mirroring.
The Mirroring page is shown in Figure 70 on page 258.
3. From the Mirroring Status list, select Disable and click Apply.
Port mirroring is immediately disabled on the switch. You can now use
the mirroring port for regular network operations.