Allied Telesis AT-S79 - Manual (Page 287)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 287
Deleting a Port-Based VLAN
To delete a port-based VLAN, perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge.
2. From the Bridge folder, select VLAN.
3. From the VLAN folder, select Port-Based VLAN.
The Port-Based VLAN page is shown in Figure 82 on page 285.
4. In the VLAN Action column, click delete next to the VLAN that you
want to delete.
A confirmation prompt is displayed.
5. Click OK to delete the VLAN or Cancel to cancel the deletion.
Note
You cannot delete the Default VLAN which has a VID of 1.