Allied Telesis AT-S79 - Manual (Page 265)

AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 265
Deleting a Group MAC Address
To delete a Group MAC Address from the Static Multicast Address Table,
perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge.
The Spanning Tree folder opens.
2. From the Spanning Tree folder, select Static Multicast.
The Static Multicast Address Table Page is shown in Figure 71 on
page 262.
3. Click delete next to the group number that you want to change.
The Static Multicast Address Table Page is updated.