Samsung SPH-M910ZIASPR - Manual (Page 57)

2A. Device Basics 43
Dev
ice
Basics
ⅷ Speed dial setting to access the Speed Dialing menu
where you can assign a speed dial location to a
current Contacts entry. See “Speed Dialing” on
page 50.
ⅷ Add 2-sec pause: to insert a two second pause to
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed).
ⅷ Add wait to insert a hard pause within the number
string (the phone waits for your input). A wait requires
that any consecutive numbers be manually sent by
touching
Yes .
Answering Calls
1. Make sure your device is on. (If your device is off,
incoming calls go to voicemail.)
2. Press or touch and hold to answer
an incoming call. Other options include:
Ⅲ Reject ( ) sends the call directly to your
voicemail box.
Ⅲ Silence to temporarily mute the ringer.
Ⅲ Reject with msg sends the call to your voicemail
box and immediately allows you to send that
caller a text message.
Pressing the Volume down button also mutes the
ringer.
Your device notifies you of incoming calls in the
following ways:
ⅷ The phone rings or vibrates.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. You may also
see the caller’s phone number, if available.
Note: All call answering options listed below require you
touch and hold the button to activate the function.
When unlocked, some functions can be activated by
tapping the onscreen button.
Accept Accept
Reject Reject
SPH-M910.book Page 43 Monday, June 14, 2010 1:08 PM