Samsung SPH-M910ZIASPR - Manual (Page 30)

16 2A. Device Basics
Speaker – Speakerphone feature is enabled.
Battery Strength – Shows your current battery
charge level. (Icon shown is fully charged.)
Battery Low – Shows your current battery
charge level is very low.
Device Power Critical – Shows your current
battery only has three percent power remaining
and will immediately shutdown. Represented as
a blinking icon.
Bluetooth Active – Bluetooth technology is
active and enabled.
Bluetooth Connected – Bluetooth technology is
active and communicating with an external
device.
GPS Location On – Device location feature is on
and available for location-based services such
as GPS Navigation (see page 188).
GPS Communicating – Device location feature is
on and communicating.
Status Bar – Status Icons
Wi-Fi Connected – Wi-Fi is connected, active,
and communicating with a Wireless Access
Point (WAP).
Wi-Fi Connection Issue – Wi-Fi is active but there
is a communication issue with the target
Wireless Access Point (WAP).
MicroSD Unmounted – The internal microSD
card has been disconnected (unmounted) from
the device and is now ready for either removal
or formatting.
Preparing for Mounting – The internal microSD
card is being prepared for mounting to the
device. This is required for communication with
the internal microSD card.
USB Connection – The device has detected an
active USB connection.
USB Debug Connection – The device has
detected an active USB connection and is in a
USB Debugging mode.
Status Bar – Status Icons
SPH-M910.book Page 16 Monday, June 14, 2010 1:08 PM