Samsung SPH-M910ZIASPR - Manual (Page 176)

162 3B. Web and Data Services
Wi-Fi communication requires access to an existing
and accessible Wireless Access Point (WAP). These
WAPs can either be Open (unsecured) as within most
Hot Spots, or Secured (requiring knowledge of the
Router name and password).
Turning Wi-Fi On and Off
By default, your device’s Wi-Fi feature is turned off.
Turning Wi-Fi on makes your device able to discover
and connect to compatible in-range WAPs.
Turn Wi-Fi on:
1. Press > and tap >
Wireless & networks.
2. Tap the Wi-Fi field to activate the feature
(checkmark indicates active). The device scans for
available in-range wireless networks.
To turn Wi-Fi off:
1. Press > and tap >
Wireless & networks > Wi-Fi .
2. Tap to remove the green checkmark and
deactivate Wi-Fi.
To connect to a Wi-Fi network:
1. Press > and tap >
Wireless & networks > Wi-Fi settings.
Ⅲ The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
2. To manually add your new network connection:
Ⅲ Touch Add Wi-Fi network .
Ⅲ Enter the Network SSID. This is the name of your
Wireless Access Point.
Ⅲ Tap the Security field and select a security option.
This must match the current security setting on
your target WAP.
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery
and reduce your use times.
Note: When you select an open network, you will be
automatically connected to the network.
SPH-M910.book Page 162 Monday, June 14, 2010 1:08 PM