Campbell Scientific CR800 and CR850 Measurement and Control Systems - Manual (Page 512)

Appendix B. Status Table and Settings
512
Table 117. Status-Table Fields and Descriptions
Fieldname Description Variable Type Default Range Edit? Info Type
Security14
Array of the three security
settings or codes. Will not be
shown if security is enabled.
Integer array of 3 0, 0, 0
0 - 65535 (0 is
no security)
Yes Status
RS232Power
Controls whether the RS-232
port will remain active even
when communication is not
taking place. If RS-232
handshaking is enabled
(handshaking buffer size is
non-zero), this setting must
be set to yes
Boolean 0 0 or 1
RS232Handshaking
RS-232 hardware-
handshaking buffer size. If
non-zero, hardware
handshaking is active on the
RS-232 port. This setting
specifies the maximum
packet size sent between
checking for CTS.
Integer 0
RS232Timeout
RS-232 hardware-
handshaking timeout. For
RS-232 hardware
handshaking, this specifies in
tens of ms the timeout that
the datalogger will wait
between packets if CTS is
not asserted.
Integer 0
CommActive 15
Array of Boolean values
telling if communications are
currently active on the
corresponding port.
CommActiveRS-232
CommActiveME
CommActiveCOM310
CommActiveSDC7
CommActiveSDC8
CommActiveSDC10
CommActiveSDC11
CommActiveCOM1
CommActiveCOM2
Boolean array of 9
False, except
for the active
COM
True or False Status