Campbell Scientific 229 Water Matric Potential Sensor and CE4/CE8 User Manual
229 heat dissipation matric water potential sensor
Table of contents
Document Outline
- Revision and Copyright Information
- Warranty and Assistance
- Table of Contents
- 229 Heat Dissipation Matric Water Potential Sensor
- 1. General Description
- 2. Specifications
- 3. Installation
- 4. Wiring
- 5. Example Programs
- 5.1 Choosing a Reference for the Thermocouple Readings
- 5.2 Adjusting for Thermal Properties of Sensor During Early Heating Times
- 5.3 Datalogger Program Structure and Multiplexers
- 5.4 Temperature Correction
- 5.5 Example #1 — CR1000 with CE4 and Four 229s
- 5.6 Example #2 — CR1000 with AM16/32-series Multiplexer, CE4 and Sixteen 229 Sensors with Temperature Correction
- 5.7 Example #3 — CR10X with 229 Sensor
- 5.8 Example #4 — CR10X with AM16/32-series, CE4, and Sixteen 229 Sensors
- 6. Calibration
- 7. Maintenance
- 8. Troubleshooting
- 9. References
- Campbell Scientific Contact Information