Campbell Scientific 43347 RTD Temperature Probe and 43502 Aspirated Radiation Shield User Manual

Campbell Scientific Measuring instruments

Text mode
Original mode

43347 RTD Temperature Probe,

43502 and 41003-5 Radiation

Shields

Revision: 11/13

C o p y r i g h t © 1 9 9 4 - 2 0 1 3

C a m p b e l l S c i e n t i f i c , I n c .

Table of contents

Document Outline

Revision and Copyright Information
Warranty
Assistance
Table of Contents
1. General
2. Specifications
3. Installation
- 3.1 Siting
- 3.2 Assembly and Mounting
- 3.3 43502 Radiation Shield Installation
- 3.4 41003-5 Radiation Shield Installation
4. Wiring
- 4.1 43347-VX Temperature Probe Wiring
- 4.2 43502 Aspirated Radiation Shield Wiring
5. Datalogger Programming for the 43347-VX Probe
- 5.1 Programming for Calibrated 43347-VX Probes
  - 5.1.1 CR1000 Example for Calibrated 43347-VX Probes
  - 5.1.2 CR10X Example for Calibrated 43347-VX Probes
- 5.2 Programming for Uncalibrated 43347-VX Probes
  - 5.2.1 CR1000 Example for Uncalibrated 43347-VX Probes
  - 5.2.2 CR10X Example for Uncalibrated 43347-VX Probes
6. 43347-IX Measurement using Current Excitation
- 6.1 Wiring
- 6.2 Datalogger Programming
  - 6.2.1 Datalogger Programming for Calibrated 43347–IX Probes
  - 6.2.2 Datalogger Programming for Uncalibrated 43347-IX Probes
- 6.3 Resistance Measurement Instruction Details
  - 6.3.1 Determining the Excitation Current
  - 6.3.2 Reducing Measurement Noise
7. Maintenance
8. 43347 RTD Temperature Probe Calibration
9. Manufacturer’s Information
10. Troubleshooting
11. References
Appendix A. Example CR10(X) Program for Ice Bath Calibration
Appendix B. 43502 Aspirated Radiation Shield
Appendix C. 43347 Aspirated Radiation Shield
- C.1 Specifications
- C.2 Installation
Appendix D. Measure Two 43347-IX Probes Using One Current Excitation Channel
- D.1 Wiring
- D.2 Example Program for two Calibrated 43347-IX Probes
Campbell Scientific Companies