Horner APG XLt OCS - Manual (Page 7)

MAN0878-04-EN VISUAL MAP
August 12, 2009 Page 7 of 100 ECN # 979
VISUAL MAP OF MAJOR TASKS AND THE KEY CHAPTERS TO ASSIST YOU
The following map is provided to show you the major types of tasks needed to be performed and the key
chapters in this manual you need to refer to for information and help.
Directions: Major tasks are listed at the top of the map with the key chapters listed beneath that you
need to consult in order to perform the tasks.
FIRST STEP of ANY TASK: DATASHEET
Each XLe/XLt unit is sent with a datasheet in the box. The datasheet is the first document you need
to refer to for model-specific information related to XLe/XLt models such as pin-outs, jumper
settings, and other key installation information. The web version of this manual has all of the
XLe/XLt datasheets attached to it. Visit our website (see page 96) to obtain updates to datasheets and
user documentation.
QUICK START INSTALLATION PROGRAMMING TROUBLESHOOTING
Safety / Compliance
Page 8
Safety / Compliance
Page 8
Safety / Compliance
Page 8
Safety / Compliance
Page 8
Introduction
Page 10
Introduction
Page 10
Introduction
Page 10
Introduction
Page 10
Mechanical Installation
Page 14
System Settings
Page 50
Maintenance
Page 88
Electrical Installation
Page 20
Cscape Configuration
Page 71
Troubleshooting
Page 91
Serial Comm
Page 22
User Interface
Page 79
CAN Comm
Page 24
Removable Media
Page 28
Communication Options
Page 26
General I/O
Page 32
High Speed I/O
Page 38 General I/O
Page 32 Registers
page 66
Fail – Safe System
Page 79
Clone Unit
Page 87