Horner APG QX751 OCS User Manual

Qx751 models

MAN0889-03-EN

Specifications / Installation

__________________________________________________________________________________________________________________________________________________
11/20/2009 Page 1 of 6 1023

INTRODUCTION

QX751 provides

Powerful Standard Features in one unit including

Controller

Network

I/O

Operator Interface

Highly Visual Display Screen

Optional Back Pack adds comprehensive I/O and communication capabilities.

Table 1 – Features

Standard Features on QX751

Features on Back Pack

(BP)

Options

Base

Model

Network

Screen

Type

Standard QX

Features

HE-BP41

HE-BP43

HE-
QX751

On-

Board

Ethernet

100Base

15” TFT

XGA

with 65,536

colors

CompactFlash

3 Serial Ports

Ethernet

USB A

USB B

(Version 1.1)

FOX

CsCAN

Up to 2

Plastic

SmartStack

Modules

(for

additional

I/O)

FOX

CsCAN

Up to 4

Plastic

SmartStack

Modules (for

additional

I/O)

High Speed

Counter

Other Products Commonly Used with Color QX (Back Pack Revision G required)

Plastic SmartStack

Modules

Provide a wide variety of I/O options for the QX. Require
little space and are easy to install.

Fiber Optic Extension

System

(FOX)

Extends a high-speed QX backplane enabling
SmartStack I/O Modules to be mounted several meters
from the QX. The FOX, also, significantly increases the
number of SmartStack I/O modules supported by one
QX.

SmartStix Modules

Is a family of remote I/O products for the QX.

If using a Back Pack Option (BP41 or BP43), refer to the following specifications.

2 SPECIFICATIONS / PRODUCT DESCRIPTIONS

Table 2 - QX Base Specifications

Base Models

QX751

(15-inch) (XGA)

Display Type
(LCD with
backlight)

1024 x 768

TFT

Display Size

15”

Display Screen
Dimensions

12“W x 9“H

(304 x 228 mm)

Display Memory

8 Mbytes

User Keys

7 configurable keys + System Key

Screens
Supported

1,023 screens

(300 objects per screen)

Number of
Colors

65536

Primary Power

Voltage:

24 VDC (+/-10%)

Steady State Current:

1.66 A @ 24 VDC

Inrush Current:

(30 A @ 24 VDC)

For 1 ms

QX751 Dimensions (without Back Pack option or SmartStack I/O attached).

See Panel Cut-outs and Dimensions for complete details (Section 3.2)

Height

12.31” (312.7 mm)

Width

15.07” (382.7 mm)

Mounting
Depth

3.19” (81.1 mm)

Serial Ports

3 RS-232 / RS-485 Ports. Software Selectable.

Network
Options

On-board Ethernet 100BaseT

Control
Memory

256K Ladder Memory plus 32KB Register Space

Control Scan
Rate

0.2mS / K Ladder Logic (typical)

Portable
Memory

Compact FLASH (CF) slot/USB flash drive

CF card LED – indicates CF card is inserted.

Temperature
& Humidity

32 - 122

F (0 - 50

C), 5 to 95% Non-condensing

Please refer to Compliance Table located at

USA:

http://www.heapg.com/Pages/TechSupport/ProductCert.html

Europe:

http://www.horner-apg.com/en/support/certification.aspx

QX751 Models:

HE-QX751/HEQX751C000/HEQX751C103/HEQX751C105

HE-BP41/HE-BP43 – Back Pack Module

Table 3 – Back Pack Specifications

BP41

BP43

I/O Interfaces

Plastic SmartStack I/O – 2 modules maximum

Fiber Optic Expansion (FOX) I/O – 5 bases maximum

CsCAN Network Port – 252 SmartStix I/O maximum

Plastic SmartStack I/O – 4 modules maximum

Fiber Optic Expansion (FOX) I/O – 5 bases maximum

CsCAN Network Port – 252 SmartStix I/O maximum

Built-in High Speed Counter / PWM

Yes - >1MHz max TTL or 24vdc level

Built-in PWM Outputs

Yes

TTL or 24vdc level

LEDs

3 LEDs (CAN, FIBER OK and OK)

Temperature & Humidity