Horner APG XLt OCS - Manual (Page 65)

MAN0878-04-EN CH. 12
August 12, 2009 Page 65 of 100 ECN # 979
XLt Specific:
The value chosen by the operator can not exceed the minimum or maximum set by the user program. If
the user tries to exceed the maximum point or enter a value below the minimum point, the value does not
change.
Note: If the XLe/XLt displays >>>>>> in a numeric field, the value is too big to display in the field or is
above the maximum for an editable field. If the XLe/XLt displays <<<<<< in a numeric field, the value is
too small to display or is below the minimum for an editable field.
For addition information on a specific object please see the on-line help in Cscape.
XLt Specific:
The most common editable object is the numeric object. To edit, touch the object and pop-up keypad
will appear to allow editing the value.
Beeper Acknowledgement
The XLt contains an internal beeper that provides an audible acknowledgment when an operator
touches a graphic object that accepts touch input. When the graphical object is enabled, a short
5mSec tone is emitted. When the graphical object is disabled, a longer 100mSec tone is emitted to
enounce that graphical object is not currently accepting the touch input.
If beep acknowledgement is not desired, the beeper function can be disabled from the system menu.