Horner APG XLt OCS - Manual (Page 31)

MAN0878-04-EN CH. 8
August 12, 2009 Page 31 of 100 ECN # 979
8.7
Using Removable Media to View and Capture Screens
The XLe/XLt File System uses bitmap files with the .BMP (.bmp) extension to store XLe/XLt graphic
screen captures.
To view a captured XLe/XLt screen, use the Removable Media Manager to find and highlight the desired
.BMP file, and then press Enter.
To capture an XLe/XLt screen, turning On the assigned Screen Capture Control Register will capture
the current XLe/XLt graphics screen and write it to the Micro SD card using the assigned Screen Capture
Filename.
Before capturing an XLe/XLt screen, Cscape must first be used to assign a Screen Capture Control
Register and Filename in the application. To do this, first open the Graphics Editor by selecting the
View / Edit Screens item on the Cscape Screens menu. Next select the Screen Capture item of the
Graphics Editor Config menu and then enter a Control Register and Filename.