Horner APG XLt OCS User Manual
Page 61
MAN0878-04-EN CH. 11
August 12, 2009
Page 61 of 100
ECN # 979
Enable AutoRun
No
= OCS will be in IDLE mode after AutoLoad or Automatic Restore.
Yes
= OCS will be automatically placed into RUN mode after AutoLoad or
Automatic Restore.
“Enable AutoLoad” displays the following options which can be selected:
XLt:
XLe:
Enable AutoLoad
No
= Does not load AUTOLOAD.PGM automatically when application
program is absent or corrupted.
Yes
= Loads AUTOLOAD.PGM file automatically from RM when application
program is absent or corrupted.
Clone Unit
‘Clone Unit’ feature allows the user to “clone” the OCS of the exact same model. This feature “clones”
application program and unit settings stored in Battery backed RAM of an OCS into the RM (refer
Removable Media
for details on using RM). It can then be used to clone a different OCS (exact
same model).
This feature can be used for:
• Replacing an OCS by another unit of the same model.
• Duplicating or “clone” units without a PC.
Clone
Selecting “Clone Unit” menu will open the following menu screen:
XLt:
XLe:
Note:
a. In the above Figure, F3 and F4 (XLe menu) are inactive in Clone Unit.
b. DSK – when selected shows number of total and free bytes in Removable Media.