Chapter 2 : introduction, Chapter 2: introduction – Horner APG XLt OCS User Manual
Page 11
MAN0878-04-EN CH. 2
August 12, 2009
Page 11 of 100
ECN # 979
CHAPTER 2: INTRODUCTION
2.1
Visual Overview of XLe/XLt and Topics Covered in this Manual
Figure 2-1 – Visual Overview of XLE/XLT and Topics of Interest Covered in the User Manual
2.1.1
Where to Find Information about the XLe/XLt
a. Datasheets - The datasheets are the first documents you need to refer to for key information
related to specific XLe/XLt models. (A datasheet is provided in the box with your unit.)
The datasheets for all XLe/XLt models are attached to the back of this manual on our website, and they
are also available individually on the web.
Datasheets contain pin-outs, jumper settings and other model specific information.
b. User Manual -This manual provides general information that is common to XLe/XLt models and can
be downloaded from our web. Visit our website (see page 96) to obtain user documentation and updates.
Four main types of information are covered in the manual.
Safety and Installation guidelines / instructions (Mechanical and Electrical)
Descriptions of hardware features (Serial ports, Removable Media, Communication Options, etc.)
Configuration and Use of the XLe/XLt
Maintenance and Support
Serial Comm
See page 23.
Removable
Media
See page 29.
CAN Comm
See
page 25.
General I/O
See page 33.
High Speed I/O
See page 39.
User Interface
See page 61.
Mechanical
Installation
See page 15.
Electrical
Installation
See page 21.