Horner APG XL6 OCS HE-XL1E14 - Manual

MAN0902-01-EN Specifications / Installation
__________________________________________________________________________________________________________________________________________________________________
3/26/2009 Page 1 of 7 ECN # 956
1 Specifications
Specifications
Digital DC Inputs
Inputs per Module
12 including 4 configurable
HSC inputs
Commons per Module 1
Input Voltage Range 12 VDC / 24 VDC
Absolute Max. Voltage 35 VDC Max.
Input Impedance 10 k Ω
Input Current Positive Logic Negative Logic
Upper Threshold 0.8 mA -1.6 mA
Lower Threshold 0.3 mA -2.1 mA
Max Upper Threshold 8 VDC
Min Lower Threshold 3 VDC
OFF to ON Response 1 ms
ON to OFF Response 1 ms
HSC Max. Switching Rate
10 kHz Totalizer/Pulse,
Edges
5 kHz Frequency/Pulse,
Width
2.5 kHz Quadrature
Digital Relay Outputs
Outputs per Module 6 relay
Commons per Module 6
Max. Output Current per Relay 3 A at 250 VAC, resistive
Max. Total Output Current 5 A continuous
Max. Output Voltage 275 VAC , 30 VDC
Max. Switched Power 1250 VA, 150 W
Contact Isolation to XL6
ground
1000 VAC
Max. Voltage Drop at Rated
Current
0.5 V
Expected Life
(See Derating section for
chart.)
No load: 5,000,000
Rated load: 100,000
Max. Switching Rate
300 CPM at no load
20 CPM at rated load
Type Mechanical Contact
Response Time
One update per ladder scan
plus 10 ms
Thermistor Inputs, Medium Resolution
Number of Channels 4
Input Ranges
Input Impedance
(Clamped @ -0.5 VDC to 12
VDC)
10K OHMThermistor
Half Bridge
9.59K ohm pulled up to
4.8 VDC
Nominal Resolution
%AI at 10K Ohm
10 Bits
15,008 counts
Conversion Speed
All channels converted once
per ladder scan
Max. Error at 25 ° C reading /
ambient
±0.5°F or ±0.3°C
Using specified linearization
in ladder program
Filtering
160 Hz hash (noise) filter
1-128 scan digital running
average filter
General Specifications
Required Power
(Steady State)
500 mA @ 24 VDC
Required Power
(Inrush) 30 A for 1 ms @ 24 VDC – DC Switched
2.5 A for 4 ms @ 24 VDC - AC Switched
Primary Power Range 10 – 30 VDC
Relative Humidity 5 to 95% Non-condensing
Clock Accuracy
+/- 35 ppm maximum at 25 ° C
(+/- 1.53 Minutes per Month)
Operating Temperature -10 ° C to +60 ° C
Terminal Type Screw Type, 5 mm Removable
Weight 26.5 oz. (.751 kg)
CE
UL See Compliance Table at
http://www.heapg.com/Pages/TechSupport/ProductCert.html
Connectivity
Serial Ports 2 Serial Ports – RS232 & RS485
Ethernet 10/100-Mbps (XL6e models only)
USB USB Networking Port for communication with PCs and programming Port
Removable Media
Removable Media for upto 2 GB of storage for programs, data logging or
screen capture
Smartstix Remote IO modules communicating on CAN
Note: Highest usable frequency for PWM output is 65 KHz
HE-XL102-14/HE-XL1E2-14
XL6/XL6e OCS Models
HE-XL102–14 / HE-XL1E2–14
12 Digital DC Inputs
4 10k Thermistors
6 Digital Relay Outputs