HP StorageWorks XP Remote Web Console Software User Manual
Page 151
Continuous Access XP Journal user guide 151
5.
If no error occurs in
, wait until suspension finishes. After suspension finishes, check whether
there is a secondary data volume (which was originally a primary data volume) whose pair status is
other than PSUS. If such a pair exists, remove the error cause and go back to
after resuming
your business task at the secondary site.
6.
If there is no secondary data volume (which was originally a primary data volume) whose pair status
is other than PSUS, data in primary data volumes is the same as data in secondary data volumes, and
the secondary data volume (which was originally primary data volume) is usable. Resume applications
at the primary site.
7.
Execute the
pairresync -swaps
command (
pairresync
is the RAID Manager XP command for
resynchronizing pair and
-swaps
is a swap option). This reverses primary and secondary data
volumes to resynchronize pairs.
CAUTION:
When executing the
pairresync -swaps
command, use the
-d
option to specify a
data volume. However, if the restore journal group where the data volume belongs is in Active,
Halting, or Stopping status, the
pairresync -swaps
command is rejected. For more information
about journal group status, see ”
Displaying detailed information about journal groups
For more information about using RAID Manager XP, see the HP StorageWorks RAID Manager XP user
guide.
For more information about status of data volumes, see ”