Advanced configuration – HP ProCurve 520wl Wireless Access Point User Manual

Page 93

Text mode
Original mode

Advanced Configuration

CAUTION

Once a VLAN Management ID is configured and is equivalent to one of the VLAN User IDs on the AP, all
members of that User VLAN will have management access to the AP. Be careful to restrict VLAN membership
to those with legitimate access to the AP.

1. Click Configure > VLAN.
2. Set the VLAN Management ID to use the same VLAN ID as one of the configured SSID/VLAN pairs. See

Typical

User VLAN Configurations

for details.

3. Place a check mark in the Enable VLAN Protocol box.

Disable VLAN Management

1. Click Configure > VLAN.
2. Remove the check mark from the Enable VLAN Protocol box (to disable all VLAN functionality) or set the VLAN

Management ID to 0 (to disable VLAN Management only).

4-51