HP ProCurve 520wl Wireless Access Point - Manual (Page 110)

Commands
Retrieve File via TFTP
Use the Retrieve File via TFTP tab to upload Configuration files from the AP to the TFTP server. The TFTP server
must be running and configured to point to the directory to which you want to copy the uploaded file. We suggest you
assign the file a meaningful name, which may include version or location information.
If you don’t have a TFTP server installed on your system, install the TFTP server from the CD.
The Retrieve AP via TFTP tab shows version information and allows you to enter TFTP information as described
below.
• Server IP Address: Enter the TFTP server IP Address.
– Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
• File Name: Enter the name of the file to be uploaded.
NOTE
Use the following procedure to retrieve a Configuration file from an AP to a file:
1. Configure all the required parameters in their respective tabs.
2. Reboot the device.
3. Retrieve and store the Configuration file. Click the Retrieve Config File button to initiate the upload of the
Configuration file from the AP to the TFTP server.
4. Update the Configuration file as necessary.
Figure 6-8 Retrieve File via TFTP Command Screen
6-7