beautypg.com

Reboot, Reboot -10 – HP ProCurve 520wl Wireless Access Point User Manual

Page 113

background image

Commands

Reboot

Use the Reboot tab to save configuration changes (if any) and reset the AP. Entering a value of 0 (zero) seconds
causes an immediate reboot. Note that Reset, described below, does not save configuration changes.

!

CAUTION

Rebooting the AP will cause all users who are currently connected to lose their connection to the network until
the AP has completed the restart process and resumed operation.

Figure 6-13 Reboot Command Screen

6-10