HP ProCurve 520wl Wireless Access Point - Manual (Page 9)

Regulatory Information
Safety Information
! Documentation reference symbol. If the product is marked with this symbol, refer to the product documentation
to get more information about the product.
WARNING A WARNING in the manual denotes a hazard that can cause injury or death.
CAUTION A CAUTION in the manual denotes a hazard that can damage the equipment.
Do not proceed beyond a WARNING or CAUTION notice until you have understood the hazardous conditions
and have taken appropriate steps.
Grounding
This product is a safety class I compliant product and has a protective earthing terminal. There must be an
uninterruptible safety earth ground from the main power source to the product’s power cord or supplied power cord set.
Whenever it is likely that the protection has been impaired, disconnect the power cord until the ground has been
restored.
For LAN cable grounding:
Q
If your LAN covers an area served by more than one power distribution system, be sure their safety grounds
are securely interconnected.
Q
LAN cables may occasionally be subject to hazardous transient voltages (such as lightning or disturbances in
the electrical utilities power grid). Handle exposed metal components of the network with caution.
Servicing
There are no user-serviceable parts inside this product. Any servicing, adjustment, maintenance or repair must be
performed only by service trained personnel.
This product does not have a power switch; it is powered on when the power cord is plugged in.
Accessories
The following accessories are available for this product:
Q
Wireless 802.11b Access Point Card 150wl
Q
Wireless 802.11a Access Point Card 160wl
Q
Wireless 802.11g Access Point Card 170wl
Q
Wireless Range Extender Antenna 100wl
Regulatory information for these products can be found in the installation instructions included with them.
ix