beautypg.com

Set radius parameters, Command line interface (cli) – HP ProCurve 520wl Wireless Access Point User Manual

Page 158

background image

Command Line Interface (CLI)

Set RADIUS Parameters

Configure RADIUS Authentication server

[Device-Name]>set radiustbl status enable seraddrfmt

ipaddr port

ssecret responsetm <1 to 10 seconds>

maxretx <0 to 4 times>

[Device-Name]>show radiustbl

Figure C-17 Results of “show radiustbl” CLI command

Enable RADIUS MAC Access Control

[Device-Name]>set radmacaccctrl enable

[Device-Name]>reboot 0

Set MAC Address Format Type

[Device-Name]>set radmacaddrformat

nodelimiter>

Set Authorization Lifetime (MAC-based authentication only)

[Device-Name]>set radauthlifetm <900-43200 seconds; default is 900>

Enable RADIUS Accounting

[Device-Name]>set radaccstatus enable

[Device-Name]>set radaccinactivetmr

[Device-Name]>show radius

C-22

See also other documents in the category HP Routers: