Wireless distribution system (wds) parameters, Command line interface (cli), 11b/g only parameters – HP ProCurve 520wl Wireless Access Point User Manual
Page 168: C-32
Command Line Interface (CLI)
802.11b/g Only Parameters
Name
Type
Values
Access CLI Parameter
Wireless Operational Mode
Integer
dot11b-only
dot11g-only
dot11bg (default)
dot11g-wifi
RW
mode
Operating Frequency Channel
Integer
1 - 14; available
channels vary by
regulatory
domain/country; see
RW
channel
Supported Data Rates
Octet String
See
Transmit Rate
,
below
R
suppdatarates
Transmit Rate
Integer32
For 802.11b-only mode:
0 (auto fallback - default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
For 802.11g-only mode:
0 (auto fallback - default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
For 802.11g-wifi and
802.11bg modes:
0 (auto fallback - default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
RW
txrate
Physical Layer Type
Integer
ERP (Extended Rate
Protocol)
R
phytype
Wireless Distribution System (WDS) Parameters
Name
Type
Values
Access CLI Parameter
WDS Table
Table
N/A
R
wdstbl
Port Index
Integer
3.1 - 3.6 (Wireless)
R
portindex
Status
Integer
enable, disable
RW
status
Partner MAC Address
PhysAddress
User Defined
RW
partnermacaddr
C-32