Status information, System status, 3 status information – HP ProCurve 520wl Wireless Access Point User Manual
Page 42: System status -1
Status Information
3
System Status
System Status is the first screen to appear each time you connect to the HTTP interface. You can also return to this
screen by clicking the Status button.
Figure 3-1
System Status Screen
Each section of the System Status screen provides the following information:
–
System Status: This area provides system level information, including the unit’s IP address and contact
information. See
for information on these settings.
–
System Alarms: System traps (if any) appear in this area. Each trap identifies a specific severity level:
Critical, Major, Minor, and Informational. See
for a list of possible alarms.
3-1