Ethernet interface, Serial port interface, Active ethernet interface – HP ProCurve 520wl Wireless Access Point User Manual
Page 130: Http interface, Radio specifications, 11a channel frequencies, 11a channel, Frequencies, Specifications ethernet interface
Specifications
Ethernet Interface
10/100 Base-TX, RJ-45 female socket
Serial Port Interface
Standard RS-232C interface with DB-9, female connector
Active Ethernet Interface
Category 5, foiled, twisted pair cables must be used to ensure compliance with FCC Part 15, subpart B,
Class B requirements
Standard 802.3af pin assignments
HTTP Interface
•
Microsoft Internet Explorer 6 with Service Pack 1 or later
•
Netscape 6.1 or later
Radio Specifications
•
•
•
•
NOTE
Refer to the Regulatory Flyer included with the AP for the latest regulatory information.
802.11a Channel Frequencies
The available 802.11a Channels varies by regulatory domain and/or country. 802.11a radio certification is available in
the following regions:
–
FCC: U.S., Canada, and Australia
–
ETSI: Europe and the United Kingdom
–
MKK:
Japan
–
SG: Singapore
–
ASIA: China, Hong Kong, and South Korea
–
TW:
Taiwan
There are five sets of frequency bands that determine the available channels depending on the regulatory domain.
Some countries restrict 802.11a operation to specific frequency bands. The Web interface and CLI display the
available channels for a radio's particular regulatory domain. In the CLI, any channels that are not available are labeled
"Not Supported".
NOTE
The original 5 GHz Upgrade Kit only supports the Lower and Middle U-NII bands. The 11a Upgrade Kit
supports all of the frequency bands described below.
A-4