HP ProCurve 520wl Wireless Access Point - Manual (Page 30)

Getting Started
Figure 2-3 Slide an AP Card into the AP
5. Slide an AP Card (not included in the kit) into slot A or B of the AP.
6. Connect the unit to a power source, such as a wall outlet.
7. Wait for the power LED to turn green before proceeding.
Figure 2-4 Power LED turns green when the unit is operational
8. Conduct a Site Survey to determine the best location for your device.
9. Once you have chosen a final location for your unit, mount the bracket and the processor module and place the
cover onto the unit as shown.
Figure 2-5 Final Installation with Cover
2-4