HP Command View for Tape Libraries Software - Manual (Page 227)

show host info
Description Shows the name, node WWN, port WWN, and mapped status of all hosts.
Syntax show host info
Availability All users and modes
Operands None
Examples To show information for all hosts:
/>show host info
Host name information:
Host # Node WWN Port WWN Current Name Mapped
------ ---------------- ---------------- ---------------- --------
1 11111111111111CC 11111111111111DD myhost1 yes
2 22222222222222CC 22222222222222DD myhost2 no
See also show host name
show interface info
show host name
Description Shows the name, node WWN, port WWN, and mapped status of all hosts.
Syntax show host name
Availability All users and modes
Operands None
Examples To show host names, world wide names, and mapped statuses for all hosts:
/>show host name
Host name information:
Host # Node WWN Port WWN Current Name Mapped
------ ---------------- ---------------- ---------------- --------
1 11111111111111CC 11111111111111DD myhost1 yes
2 22222222222222CC 22222222222222DD myhost2 no
See also set host name
show host sparselunmap
Description Shows hosts that might have sparse LUNs.
Syntax show host sparselunmap
Availability All users and modes
Operands None
Examples The following example shows when one or more sparse LUN maps have been
found:
/>show host sparselunmap
Beginning to search.
Searching for sparse LUN maps on: ifcmap-2569_1681692777
Detected 1 or more sparse LUN maps
Finished searching for sparse LUN maps.
The following host(s) are associated with device map(s) containing LUN holes.
Host # WW Node Name WW Port Name Current Name(Alias) SID
------ ---------------- ---------------- -------------------- -------
1 1234567890abcdef 1234567890abcdef test 0h
See also None.
show inet
Description Shows whether ftp, telnet, and rlogin services are enabled or disabled.
Syntax show inet [ftp] | [telnet] | [rlogin] | [all]
Availability All users and modes for ftp and telnet. Only displays rlogin information for
service-level user.
show host info 227